How To: Draw a lot of Hidden Subtiles

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fleegle411
    Senior Member

    • May 2010
    • 828
    • Northern Virginia, United States of America

    #1

    How To: Draw a lot of Hidden Subtiles

    Time for another contribution on my part to our library of knowledge. I've recently picked back up on a route revitalization project that I've been chewing away at for way too long.

    The Problem:

    In many locations on the route, subtiles (the small tiles within tiles that textures are applied to) were hidden by the original creator, many times to cover up mistakes made in terrain shaping near the edges of tiles that were far from the track anyways. In my work, I have used TSRE to create distant terrain, but these gaps at the edges of tiles have created visible slits and gaps between the detailed and distant terrain. I tried adjusting the distant terrain to account for this, but this created the illusion of a distant pit. Compounding the problem was that in some cases, a quarter of a tile or more was hidden, and in cases on a corner of a tile which was not bordered by another. This made selecting these subtiles to draw them again difficult.

    The Solution:

    Consulting with a relevant thread on this forum and combining it with a suggestion about holes from the TSRE instructions, here's how I ultimately succeeded:

    Step 1: Use the Water+ tool to put water under a subtile in the corner of the expanse I'm trying to draw. This took multiple attempts and scattered water blocks all over the tile I was working on. I found some success in paiting the water into place starting on a subtile that is drawn. It took several attempts but I eventually got it. Once the water is in place, you can select the corner subtile. This will be one corner of a rectangle of tiles we'll select in the next step.

    ​

    Step 2: Move to the opposite corner of the expanse of subtiles you're looking to draw hold shift while you click a drawn subtile. Holding shift withh select all the subtiles bwtenn the one you first selected and this one in a square or rectangular shape.

    ​

    Step 3: In the Properties bar on the left, where it says "Draw:" Select "Show." All the selected subtiles, whether they were drawn or not, will now show and be functional.

    ​

    You may now interact with those pieces of terrain as normal.
    If a hidden subtile or group of subtiles that are hidden is surrounded by drawn tiles, you can skip the water method and just select a box containing the hidden subtiles using the other drawn subtiles. The method shown here is how I managed to unhide subtiles on the corner of a tile.

    Hope someone finds this useful in future.
    You do not have permission to view this gallery.
    This gallery has 3 photos.
Working...